4
● Use two or more people to move and install ice machine. Failure to do so can result
in back or other injury.
● Never install or operate the unit in an enclosed area, such as a closed cabinet. To en-
sure proper ventilation for your ice machine, the front of the unit must be completely
un obstructed. Choose a well-ventilated area with temperatures above 45ºF (7ºC) and
below 110º F (43ºC).
● The ice machine should not be located next to ovens, grills or other sources of high
heat.
● The ice machine must be installed with all electrical and water connections in accor-
dance with state and local codes. A standard electrical supply (115VAC, 60Hz, 15A),
properly grounded in accordance with the National Electrical Code and local code and
ordinances is required.
● Do not kink or pinch the power supply cord between the ice machine and cabinet.
● The fuse (or circuit breaker) size should be 15 amperes.
● It is important for the ice machine to be leveled in order to work properly. You may
need to make several adjustments to level.
● All installations must be in accordance with local plumbing code requirements.
● Make certain that the hoses are not pinched or kinked or damaged during installation.
● Check for leaks after connection.
● Although the unit has been tested at the factory, due to long-term transit and storage,
the first batch of cubes must be discarded.
● Remove the packing materials and clean the ice machine before using.
● Turn on the water supply tap before switching on the ice machine. Never turn the water
supply tap off when the ice machine is working.
● Except to take ice from the unit, keep the door closed in order to reduce ice melting
and to promote proper ice formation.
● If the ice machine will not be used for a long time, before the next use, it must be thor-
oughly cleaned. Follow carefully the instructions provided for cleaning and use of sani-
tizing solution. Do not leave any solution inside the ice machine after cleaning.
● DO NOT touch the condenser fins. The condenser fins are sharp and can be easily
damaged.
● DO NOT use solvent-based cleaning agents or abrasives on the interior. These clean-
ers may transmit taste to the ice cubes, or damage or discolor the interior.
● Ice machine cleaner contains acids. DO NOT use or mix with any other solvent-based
cleaner products. Use rubber gloves to protect hand. Carefully read the material safety
instructions on the container of the ice machine cleaner.
● Do not use this apparatus for other than its intended purpose.
