Installation Types
This ice machine has been designed for Mobile (free-standing), Enclosed (as under a cabinet) or Built-
in (sealed) installation, indoor or outdoor. In any case, there must be adequate air space around the
unit for proper ventilation. (See diagrams on page 8 or below.)
Mobile installation:
A mobile installation will allow you to install the ice machine free-standing in any place you desire pro-
vided you have access to a water supply. You must follow the stated instructions for:
a. Electrical requirements
b. Water supply
c. Drainage
d. Leveling the ice machine
Enclosed Installation:
An enclosed installation will allow you to install the ice machine under a cabinet or inside a kitchen cab-
inet provided the required clearance space around the ice machine is respected. This installation has
the same requirements as a mobile installation.
Built-in Installation:
If this method of installation is chosen, it will still be necessary to allow adequate ventilation
space around the unit. The following additional items must be observed.
1. Place ice machine in front of installation location. Place the unit flat on the floor or on a platform de-
pending on your installation requirements.
2. The water supply line must be plumbed before connecting to the ice machine.
3. Connect the drain hose.
4. Turn on main water supply and tap. Check for water supply connection leaks. Tighten every connec-
tion (including connections at the water inlet).
5. If the electrical outlet for the ice machine is behind the cabinet, plug in the ice machine.
6. Push the ice machine into position.
7. Lower the front feet/stand-offs to level the ice machine.
8. Seal all around the cabinet to the floor with an approved caulking compound.
Installation Clearances
View from TOP
View from SIDE
13
