27
► USB Device Setting
Use this item to change settings for USB devices. Select the item and press <Enter> to open the following
menu:
Figure 2.12 USB Device
Setting submenu
Phoenix - AwardBIOS CMOS Setup Utility
USB Device Setting
USB 1.0 Controller
[Enabled]
USB 2.0 Controller
[Enabled]
USB Operation Mode
[High Speed]
USB Keyboard Function
[Enabled]
USB Mouse Function
[Enabled]
USB Storage Function
[Enabled]
*** USB Mass Storage Device Boot Setting ***
Item Help
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
USB 1.0 Controller
This item must be enabled to use the Universal Serial Bus ports on the mainboard.
USB 2.0 Controller
The USB 2.0 Controller item allows USB 2.0 functionality.
USB Operation Mode
This item is used to select the speed mode of USB.
USB Keyboard Function
Enable this item if you plan to use a keyboard connected through the USB port in a legacy operating system
(such as DOS) that does not support Plug and Play.
USB Mouse Function
Enable this item if you plan to use a mouse connected through the USB port in a legacy operating system
(such as DOS) that does not support Plug and Play.
USB Storage Function
Enable this item if you plan to use a storage connected through the USB port in a legacy operating system
(such as DOS) that does not support Plug and Play.