51
Installing the Touchscreen
Follow these instructions to install the Elo TouchSystems Touchscreens
device drivers for Windows ME/2000/98/95:
Windows 2000
1. Insert the driver CD into the CD-ROM drive.
2. Click
Start
,
Run
.
3. Type “D:\DRIVERS\TOUCH\WIN2000\SETUP.EXE” in the Run
Open dialog box, where D is your CD-ROM drive..
4. Press
OK
. Follow the instructions on the screen to install the
Touchscreen driver for your Windows 2000 operating system.
5. During installation, you are prompted to select a COM port to use
with the Touchscreen. Select COM 4.
6. Click
Next
.
7. If the "Digital Signature Not Found" dialog is displayed by
Windows, click
Yes
to continue the installation. This version of
MonitorMouse for Windows 2000 has not yet been tested by
Microsoft, but has passed Elo software quality assurance tests.
8. Restart Windows when prompted.
The Touchscreen video alignment program will automatically run when
Windows starts up. Follow the instructions on the screen to align the
Touchscreen.
Windows ME/98/95
1. Insert the driver CD into the CD-ROM drive.
2. Click
Start
,
Run
.
3. Type “D:\DRIVERS\TOUCH\WIN98\SETUP.EXE” in the Run
Open dialog box, where D is your CD-ROM drive.
4. Press
OK
. Follow the instructions on the screen to install the
Touchscreen driver for your Windows ME/98/95 operating system.
5. During installation, you are prompted to select a COM port to use
with the Touchscreen. Select COM 4.
6. Restart Windows when prompted.
The Touchscreen video alignment program will automatically run when
Windows starts up. Follow the instructions on the screen to align the
Touchscreen.
Note!
Refer to the next chapter for information on using the Touchscreen.