![background image](http://html1.mh-extra.com/html/parsun/hf4830s60-145/hf4830s60-145_user-manual_3794819018.webp)
All-in-one solar charge inverter V11 18
Step 5:
Install the terminals cover.
Step 6:
Turn on the all-in-one solar charge inverter
First, close the circuit breaker at the battery terminal, and then turn the rocker switch
on the left side of the machine to the "ON" state. The "AC/INV" indicator flashing
indicates that the inverter is working normally. Close the circuit breakers of the PV
array and the Mains. Finally, turn on AC loads one by one as the AC output is normal
to avoid a protection action caused by a large momentary shock due to simultaneous
turning on the loads simultaneously. Now, the machine goes into a normal
operation according to the set mode.
Note:
If power is supplied to different AC loads, it is recommended to first turn on the load with a large
surge current. After the load is stable, turn on the load with a small surge current.
Note:
If the all-in-one solar charge inverter does not work properly or the
LCD
or indicator is abnormal,
refer to Chapter 6 to handle the exceptions.
HF4830S60-145
Other models