INSTRUCTION REF: IN121
ISSUE No. 3
DATE 17.08.15
Page 3 of 13
www.parry.co.uk
TECHNICAL DATA
1995
1995S
Nominal Voltage:
240 V ~ 50 Hz
Nominal Current:
0.3
Nominal Wattage:
70w
Dimensions W x D x H (mm):
400 x 409 x 505
285 x 297 x 505
INSTALLATION INSTRUCTIONS
ELECTRICAL INSTALLATION
ALL APPLIANCES OTHER THAN THOSE FITTED WITH A SEALED MOULDED PLUG
MUST BE FITTED BY A QUALIFIED ELECTRICIAN, IN ACCORDANCE WITH
CURRENT REGULATIONS.
.
OPERATING INSTRUCTIONS
Your nacho warmer is designed to hold nacho chips at the perfect condition prior to
sale. Before loading the warmer must be at the correct holding temperature. To achieve
this, switch on the unit with the red switch below the door flap. The switch will illuminate
and the display lamp will come on to confirm the unit is powered.
The unit should now be left for at least 15 minutes to warm up.
Your nacho warmer can now be loaded with product, this can be done by removing the
top and pouring in the chips.
It should be noted that this unit is only suitable for the warming of nacho/tortilla
type chips and is not suitable for any other product.
The unit can be turned off at the red switch when not required.
