background image

 

INSTRUCTION REF: IN121           
ISSUE No.  3 
DATE      17.08.15 
Page 2 of 13 
 

 
 

www.parry.co.uk 

SAFETY INSTRUCTIONS

 

 
IMPORTANT:  PLEASE READ INSTRUCTIONS FULLY BEFORE USE 
 

These appliances have been designed to warm nachos prior to serving and therefore 
during its use parts of the appliance will become hot. All personnel must be given sufficient 
supervision and training in the safe use of this appliance. 
 

ALL APPLIANCES OTHER THAN THOSE FITTED WITH A SEALED MOULDED PLUG 
MUST BE FITTED BY A QUALIFIED ELECTRICIAN, IN ACCORDANCE WITH 
CURRENT REGULATIONS.  
 

The unit should be installed in compliance with the INSTALLATION INSTRUCTIONS and 
the NATIONAL REGULATIONS in force at the time. Particular attention should be paid to 
the Health and Safety at Work Act. 

 

To prevent shocks, all appliances whether gas or electric, must be earthed. 
 
To avoid scratching the highly polished exterior surface of this equipment whilst in transit, 
the protective film on the exterior surfaces has NOT been removed. 
 
It is IMPORTANT that this protective film is peeled off before the equipment is used. 
 

ENSURE THE APPLIANCE IS ISOLATED FROM THE POWER SUPPLY BEFORE 
INSTALLING, CLEANING OR MAINTAINING THE APPLIANCE 
 

These products have been designed, constructed and marketed in compliance with 
safety requirements of : 

EEC Directive 

“Low voltage” 73/23; 

EEC Directive 93/68. 

 
This product is suitable for contact with foodstuffs, and complies with 

EEC Directive 

89/109. 
 

The product(s) stated above are designed and built to comply with the following standards: 

BS EN 60335-1 

Summary of Contents for 1995S














Reviews: