0
MM
10
20
30
25
Resserrer
la vis
5 dans
l’écrou
6 en
utilisant
l’outil
3
Schraube
5 mit
Werkzeug
3 in
Mutter
6 festziehen
Tighten screw 5 into nut 6 using tool 3
Aperta o parafuso 5 na porca de parafuso 6 usando a ferramenta 3
3
ASSEMBLY INSTRUCTIONS
• Slide lug nut 6 into easy groove, on bottom frame of
board.
Step 5:
• Use measurements on the back of this instruction
booklet to position the hole of lug nut 6 25mm from edge of
aluminum frame (as illustrated). Keep the board in this
position and proceed to Step 7.
Step 6:
• Turn T-leg 4 upside down and slide the end cap-side of
the T-Leg into side frame of board, until Part 2 locates
securely over bottom frame of board.
Take care not to break the plastic end cap through
excessive leverage.
Step 7:
• Insert screw 5 into lug nut 6 and tighten using tool 3 or
a screw driver.
(Repeat steps 1 to 9 for opposite leg).
Step 8:
English
