Parkside ULG 17 A1, Operation And Safety Notes Translation Of The Original Instructions

Page: 10 / 137

10 GB/IE/NI/CY/MT
„
DANGER OF CAUSTIC
BURNS!
Protect your eyes and skin from
caustic burns from the acid
(sulphuric acid) when it comes
into contact with the battery!
„
Use acid-resistant safety
goggles, clothing and gloves!
If your eyes or skin have come
into contract with the sulphuric
acid, flush the affected body
region with plenty of clear, run-
ning water and seek
medical advice at once!
„
Avoid electrical short circuits
when connecting the car
battery charger to the battery.
Only connect the minus pole
connection cable to the minus
pole of the battery or the car
body. Only connect the plus
pole connection cable to the
plus pole of the battery!
„
Prior to connecting the mains
current, ensure that the mains
current is properly equipped
with 230 V~ 50 Hz, an
earthed zero conductor and
an FI-switch (fault-circuit
interrupter)! Otherwise, the
device can be damaged.
„
Do not use the car battery
charger near any fires, heat
and long-term temperatures
above 50 °C! For higher
temperatures, the output power
of the car battery charger will
drop automatically.
„
Only use the car battery
charger with the original
parts it was delivered with!
„
Do not cover the car battery
charger with any objects!
Otherwise, the device can
be damaged.
„
Protect the electrical contact
surfaces of the battery from
short circuit!
„
Only use the car battery
charger for the charging and
maintenance charging of
undamaged 6 V-/12 V-lead
batteries (with electrolyte
solution or gel)! Otherwise,
property damage may be the
consequence.
„
Do not use the car battery
charger for the charging and
maintenance charging of
non-rechargeable batteries.
Otherwise, property damage
may be the consequence.
„
Do not use the car battery
charger for the charging and
maintenance charging of
damaged or frozen batteries!
Otherwise, property damage
may be the consequence.
„
Please refer to the original
operating instructions about
the maintenance of your
battery prior to connecting
Safety instructions