Parkside PHDB 4 A1, Translation Of The Original Instructions

Page: 8 / 60

PHDB 4 A1
GB │ IE │ NI
│ 3 ■
Float chamber
Oil plug
Transport oil plug
Intake filter
Hose connection adapter (pre-assembled)
Water suction hose
Oil inlet/dipstick
Automatic oil switch-off
On/Off switch
Water outlet
Water inlet
High-pressure pump
Temperature relief valve
Spark plug spanner
2x axles
Funnel
2x R-clips
2x screws (M6 x 55) (upper spray gun holder)
2x screws (M8 x 50)
2x screws (M6 x 16) (lower spray gun holder)
2x washers (Ø 24 x Ø 6.3)
2x screws (M6 x 50)
4x screws (M6 x 45)
2x nuts (M8)
5@
2x washers (Ø 19 x Ø 8.3)
5#
6x washers (Ø 29.5 x Ø 13)
5$
8x nuts (M6)
5%
Open end wrench (SW 10/12)
5^
Nozzle cleaner needle (can be found in the operating instructions)
5&
Allen key (M5/M8)
A
Curved handle
Package contents
1 engine unit
2 x wheels, Ø 300 mm x 45 mm
1 x high-pressure hose 8 m, max. pressure 25 MPa (250 Bar),
max. 60°C, flexible
1 x self-primer hose, Ø 18 mm (external) /
Ø 13 mm (1/2" internal) x 3 m, with filter
1 x hand spray gun, max. pressure 28 MPa (280 Bar), max. 60°C
1 x lance pipe
4 x high-pressure nozzle, (red, yellow, green, white)
1 x low-pressure nozzle / cleaning nozzle (black)
2 x rubber feet
1 x spark plug spanner
1 x open end wrench (SW 10/12)
2 x Allen keys (M5/M8)
2 x spray gun holder
1 x funnel
1 x nozzle cleaner needle (can be found in the operating instructions)
1 x assembly material
1 operating manual
Technical data
Engine
Type 1 cylinder
4-stroke air-cooled, pull starter
Displacement cm 3 208
Nominal output
at 3600 rpm kW (HP) 4.1 / 5.57
Normal operating
speed rpm 3600
Fuel tank l 3.6
Fuel
*suitable for
E10 fuel Petrol, unleaded
Fuel consumption
at full load l/h 2.0
Oil volume - engine l 0.6
Oil type – engine 15 W 40
Cut-out function at low oil level
Spark plug
LD F7RTC
Water connection
Supply temperat-
ure max. °C 40
Supply pressure
max. MPa (bar) 0.6 (6)
Pump (self-priming)
Working pressure MPa (bar) 18 (180)
Max. working
pressure MPa (bar) 22 (220)
Flow rate l/min 8.3
Max. flow rate l/min 10
Opening tem-
perature thermal
valve °C >45
Inlet connection G3/4"
Outlet connection M22 x 1.5
Suction height
m 1
Self-pumping
start time min 1
Dimensions and weight
Length x width x
height mm 710 mm ×
495 mm ×
960 mm
Typical operating
weight kg approx. 30