Parkside PGHSA 20-Li A1, Translation Of The Original Instructions

Page: 31 / 200

31
GB
Try to keep the exposure to vibrations as
low as possible. Examples of measures to
reduce vibration exposure are the wearing
of gloves when using the tool and limiting
the working hours. All parts of the operat-
ing cycle are to be taken into account in
this (for example times in which the electric
tool is turned off and those in which even
though it is turned on, it is not running un-
der a load).
Charging time
The device is part of the X 20 V TEAM
series from Parkside and can be operated
using batteries of the X 20 V TEAM series
from Parkside. Batteries of the X 20 V
TEAM series may only be charged using
chargers of the X 20 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAP 20 B1, PAP 20 B3,
Smart PAPS 204 A1, Smart PAPS 208 A1.
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C3,
PDSLG 20 A1, Smart PLGS 2012 A1.
Charging time
(min)
PAP 20 A1
PAP 20 B1 PAP 20 A2
PAP 20 A3
PAP 20 B3
Smart PAPS 204 A1
Smart
PAPS 208 A1
PLG 20 A1
PLG 20 A4
PLG 20 C1
60 90 120 240
PLG 20 A2
45 60 80 165
PLG 20 A3
PLG 20 C3
35 45 60 120
PDSLG 20 A1
35 45 60 120
Smart
PLGS 2012 A1
35 40 50 55
Notes on safety
This section deals with the basic safety regula-
tions while working with the garden pruner.
A garden pruner is a dangerous
piece of equipment that can cause
serious or even fatal injuries if used
incorrectly or carelessly. Therefore,
for your safety and the safety of oth-
ers, always observe the following
safety instructions and ask an expert
for advice if you are unsure.
Symbols used in the
instructions
Hazard symbols with information
on prevention of personal injury
and property damage
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage