Parkside PGHSA 20-Li A1, Translation Of The Original Instructions

Page: 30 / 200

30
GB
5 Handle
6 Rear hand protection
7 Ventilation slit
9 Mounting screw
10 Blade bar (guide rail)
11 Saw chain
12 Blade encasing
13 Rechargeable battery
13a Release button
13b Soft key
14 Charger
15 Oil bottle
16 Chain sprocket
17 Threaded pin
18 Mount
19 Chain tensioner pin
Safety functions
3 Switch-on block
The switch-on block must be released
for switching on the device.
4 On-off switch with safety chain
brake
On releasing the On/Off switch, the
device immediately switches off.
5 Rear grip with hand guard (6)
Protects the hand against branches and
boughs in the case of springing away
by the chain.
11 Saw chain with small spring-back
helps you to catch spring-backs with
specially developed control systems.
Technical Data
Cordless Pruning Saw .......PGHSA 20-Li A1
Rated input voltage
.................... 20 V
Reusable battery type
......................
Li-Ion
Protection category
..........................
IP20
Weight (without
batteries) ........................
approx. 1.39 kg
Chain bar
..................Hangzhou Jingfeng
Tools Co. Ltd - 030
Chain
........................Hangzhou Jingfeng
Tools Co. Ltd - 030.043.32
Chain speed
...............................8 m/s
Chain pitch
.................................
1/3“
Chain width
............................ 1.1 mm
Teeth of the sprocket chain wheel
........ 6
Length of the chain bar .............. 192 mm
Sawing length ..................
approx. 16 cm
Acoustic pressure level
(L
pA
) .......................
81.6 dB; K
pA
= 3 dB
Sound power level (L
WA
)
measured .............
91.07 dB; K
WA
= 2 dB
guaranteed ............................... 93 dB
Vibration (a
h
) .........8.4 m/s 2
; K= 1,5 m/s
2
Temperature
............................
max 50 °C
Charging process
...................
4 - 40 °C
Operation
..........................
-20 - 50 °C
Storage .................................
0 - 45 °C
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band
.....
2400 - 2483.5 MHz
Max. transmission power
.......
≤ 20 dBm
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission
value may differ during actual use
of the power tool from the stated value de-
pending on the manner in which the power
tool is used.