PDTS 6.3 B3
■
24
│
GB
│
IE
■
If the tool is exhibiting excessive vibration levels,
the cause of the vibrations must be identified
and repaired.
■
Check the spindles, threads and fixtures regularly
for wear and tolerances for attaching abrasive
media.
■
Use only the genuine replacement parts rec-
ommended by the manufacturer, otherwise you
could put users at risk. In doubt, contact the
Service Centre.
■
Keep the compressed air appliances in a clean
condition. Clean the appliance with a soft, dry
cloth only.
■
Never use sharp or abrasive cleaning agents.
■
The compressed air tool should be stored in dry
rooms. Make sure that no moisture gets inside
the compressed air tool.
Disposal
The packaging consists of environmen-
tally friendly material. It can be dis-
posed of in local recycling containers.
Do not dispose of the appliance in the
normal domestic waste!
Your local community or municipal authorities
can provide information on how to dispose of the
worn-out appliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary. The packag-
ing material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product.
The product is recyclable, subject to
extended producer responsibility and is
collected separately.
Dispose of lubricants and cleaning agents in an
environmentally friendly manner. Observe the legal
regulations.
■
Dispose of lubricant residues at a disposal
point. Do not allow lubricants to enter drains or
watercourses. Do not allow them to get into the
subsoil/soil. Make sure you use a suitable mat/
surface. Dispose of lubricants in accordance
with official regulations.
■
Dispose of contaminated maintenance material
and consumables at a collection point provided
for this purpose.
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase. If this product has any faults,
you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the
warranty described below.
Warranty conditions
The warranty period starts on the date of purchase.
Please keep your receipt in a safe place. This will
be required as proof of purchase.
If any material or manufacturing fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
or refund the purchase price (at our discretion).
This warranty service requires that you present the
defective appliance and the proof of purchase (re-
ceipt) within the three-year warranty period, along
with a brief written description of the fault and of
when it occurred.
If the defect is covered by the warranty, your prod-
uct will either be repaired or replaced by us. The
repair or replacement of a product does not signify
the beginning of a new warranty period.
Summary of Contents for PDTS 6.3 B3
Page 3: ...A...
