Parkside PBSG 95 E6, Translation Of The Original Instructions

Page: 54 / 96

54
GB MT
Content
Introduction .......................... 54
Proper use ............................ 54
General description ............... 55
Scope of delivery ................. 55
Description of functions ......... 55
Overview ............................ 55
Technical data ....................... 55
Safety information ................. 56
Graphical symbols................ 56
General Safety Directions
for Power Tools
..................... 57
Additional safety instructions .. 60
Residual risks ....................... 60
Operation ............................. 61
Grinding drill bits ................. 61
Replacing the grindstone ....... 62
Removing blockages ............. 63
Cleaning and servicing .......... 63
Cleaning ............................. 63
Maintenance ....................... 64
Storage ................................ 64
Transport .............................. 64
Disposal/environmental
protection ............................. 64
Spare parts/accessories ......... 65
Troubleshooting ..................... 65
Guarantee ............................ 66
Repair Service ....................... 67
Service-Center ....................... 68
Importer ............................... 68
Introduction
Congratulations on purchasing your
new device. You have chosen a
high-quality device.
This device was quality-tested and
subjected to a fi nal inspection du-
ring production, therefore ensuring
proper functioning of your device.
The instruction manual forms
part of this device. It contains
important information on safety, use
and disposal. Before using the de-
vice, you should familiarise yourself
with all operating and safety instruc-
tions. Use the device only as descri-
bed and for the stated fi elds of ap-
plication. Store the instruction manu-
al carefully and ensure that all docu-
ments are handed over in the event
that the device is passed on to ano-
ther user.
Proper use
The tool is intended for sharpening
HSS drill bits with a diameter of
3-13 mm. It must not be used to
grind carbide drills.
Any other use not expressly ap-
proved in the present instruction
manual can damage the device and
thus present a substantial risk for
the user.
Translation of the original
EC declaration of conformity ... 90
Exploded Drawing ................. 93