Parkside 385568 2107, Operation And Safety Notes Translation Of The Original Instructions

Page: 24 / 157

22 GB/CY
˜
Storage
Before storage, always:
– Switch the product off, remove the
battery pack
[ 15]
and let the product cool
down .
–
Clean the product (see “Cleaning and
care“) .
–
Secure the safety knife bar
[ 2]
in the
blade guard
[ 12]
.
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place .
Always store the product in a place that is
inaccessible to children .
The ideal long term storage (longer than
3 months) temperature is b20 and
+26 °C .
Short term storage: Suspending the
product from the wall
m
WARNING! RISK OF ELECTRIC
SHOCK!
When drilling, be careful not to
damage any supply lines . Use
suitable search devices to find these
or consult an installation plan for
guidance .
Contact with electrical cables can
lead to electric shock and fire .
Contact with a gas pipe can result in
an explosion .
Using the motor housing suspension
[ 11]
:
–
Fix a screw with a screw head diameter
of 8 to 10 mm at the desired position on
a suitable wall .
–
If the wall consist of bricks, stone or a
similar material: Use a dowel to secure
the screw .
–
Let the screw head protrude from the wall
by approx . 10 mm .
–
Slide the motor housing suspension
[ 11]
over the screw to suspend the product .
Using the blade guard suspension
[ 13]
:
–
Fix 2 screws with a screw head diameter
of 5 to 6 mm at the desired position on a
suitable wall .
The center to center distance between
the 2 screws should be 17 mm .
–
If the wall consist of bricks, stone or a
similar material: Use dowels to secure the
screws .
–
Let the screw heads protrude from the
wall by approx . 10 mm .
–
Slide the blade guard suspension
[ 13]
over the screws to suspend the product .
Battery pack advice
Only store the battery pack
[ 15]
partially
charged . The battery pack should be
charged to 40 to 60 % before storing for
extended periods .
Check the battery pack
[ 15]
charge about
every 3 months when storing for extended
periods . Recharge as necessary .
˜
Transportation
Before transportation:
–
Switch the product off .
– Remove the battery pack
[ 15]
.
–
Let the product cool down .
– Fit the blade guard
[ 12]
.
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles .
Secure the product to prevent it from
slipping or falling over .