Parkside 385568 2107, Operation And Safety Notes Translation Of The Original Instructions

Page: 20 / 157

18 GB/CY
Charge the battery pack
[ 15]
before
operation when it is at medium or low
charging level .
The charging control LEDs (red
[ 20]
and
green
[ 21]
) indicate the status of the charger
[ 19]
and the battery pack
[ 15]
:
LED Status
Red LED lights up Battery pack charges
Green LED lights up
Battery pack fully
charged
Green and red LED
flashing
Battery pack defective
Red LED flashing
Battery pack too cold
or too warm
Green LED lights up
(without battery pack)
Charger ready
Insert the battery pack
[ 15]
into the charger
[ 19]
.
Connect the power cord with power plug
[ 22]
of the charger
[ 19]
to a socket-outlet .
When the battery pack
[ 15]
is fully charged:
–
Disconnect the power plug
[ 22]
of the
charger
[ 19]
from the socket-outlet .
–
Remove the battery pack
[ 15]
from the
charger
[ 19]
.
˜
Operation
m
WARNING! RISK OF INJURY!
Wear protective gloves!
Wear hearing protection!
Wear safety goggles!
Wear protective, slip resistant
footwear!
m
ATTENTION!
u
Check the product for wear and tear
before each use .
u
The product will be switched ON when
the on/off switch
[ 7]
and the safety
switch
[ 4]
are held simultaneously . When
either one of the switches is released the
product will be switched
OFF . Should
one of the two switches be damaged,
stop working with the product .
˜
Switching the product on/off
m
WARNING! RISK OF INJURY!
u
Firmly hold the product with both hands
while directing the product away from the
body (Fig . D) . Check that the product is
not in contact with other objects before
switching on .
Removing the blade guard
Unlock the blade guard
[ 12]
: Press and hold
Press
[ 14]
.
Pull the blade guard
[ 12]
off the safety knife
bar
[ 2]
(Fig . J) .