PAMFW 20-Li A1
GB
│
IE
│
23
■
Application
–
removing material residues, such as tile
adhesive, when replacing damaged tiles
–
milling grout on wall and floor tiles.
Scraper
Materials
mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application
–
removing material residues, such as carpet glue
residue on the floor.
Sanding plate
Materials
Wood and metal (sanding sheets supplied),
wood*, metal*
* Depending on the sanding sheet
Application
–
sanding up to edges and hard-to-reach areas.
Fitting the sanding sheet onto the
sanding plate
♦
Place the sanding sheet centrally on the
sanding plate .
Changing tools
NOTE
►
If you plan to use the dust extraction unit, it
must be connected before fitting or changing
the tool (see. section "Connecting a dust
extraction unit").
WARNING! RISK OF INJURY!
■
Always remove the battery before working on
the power tool.
♦
If necessary, remove an already fitted tool.
To do this, raise the tool release lever .
♦
Fit the tool (e.g. the plunge saw blade ) onto
the tool holder.
NOTE
►
You can fit the tools in any snap position on
the tool holder.
♦
Lock the tool into place by pushing the tool
release lever back down again.
■
Check that the tool is fitted firmly.
Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury.
IB_339108_PAMFW20-LiA1_LB8.indb 23
09.03.20 11:55
Summary of Contents for 339108 1910
Page 3: ...6 5 4 Z52 A1 Z64 B2 HCS C A...
Page 5: ...20V max 18V...