PAP 20 A1 + PLG 20 A1
GB
│
IE
│
NI
│
CY
│
7
■
Importer
Please note that the following address is not the
service address . Please use the service address
provided in the operating instructions .
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www .kompernass .com
Disposal
The packaging protects the appliance
from damage during transport . The pack-
aging materials have been selected for
their environmental friendliness and disposal attri-
butes, and are therefore recyclable .
Returning the packaging into the material cycle
conserves raw materials and reduces the amount
of waste generated . Dispose of packaging materi-
als that are no longer needed in accordance with
applicable local regulations .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Do not dispose of batteries in your
normal household waste!
Defective or worn-out rechargeable
batteries must be recycled according to Directive
2006/66/EC .
Take the battery pack and/or appliance to a near-
by collection facility .
Please consult your local authorities regarding
suitable disposal of worn out power tools/battery
packs .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary . The
packaging material is labelled with abbreviations
(a) and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product .
Notes on the EC Declaration of
Conformity
This appliance complies with the basic require-
ments and other relevant provisions of the Electro-
magnetic Compatibility Directive 2014/30/EU
and the Low-Voltage Directive 2014/35/EU .
The complete original Declaration of Conformity is
available from the importer .
RoHS Directive
(2011/65/EU)
*
*The manufacturer bears the full responsibility for
compliance with this conformity declaration . The
object of the declaration described above complies
with the requirements of the Directive 2011/65/EU
of the European Parliament and Council of 8 June
2011 on the limitations of use of certain dangerous
substances in electrical and electronic appliances .
Summary of Contents for 331790_1907
Page 3: ...A ...
Page 23: ...PAP 20 A1 PLG 20 A1 18 GR CY ...