Parkside 327525 1904 Translation Of The Original Instructions Download Page 7

7

GB

  Danger of electric shock!

  Risk of injury due to ejected 

parts

  Keep persons in the vicinity 

away from the device

  Caution – sharp cutting bla-

de! Keep feet and hands 

away. Risk of injury.

  Switch off the motor and 

disconnect the ignition key 

before adjustment or repair 

work or if the power cable is 

caught or damaged.

  Caution! The lawnmower 

blade continues to run after 

switching off.

  Noise level specifi cation

L

WA

 in dB

  Do not dispose of electrical 

equipment in domestic was-

te.

Do not work in the rain and 

do not cut wet grass.

  Wear eye protection.

  Wear ear protection.

  Cutting diameter

Note ignition key

Symbols used in the 

instructions:

  Hazard symbols with 

information on preven-

tion of personal injury 

and property damage. 

  Precaution symbol (explana-

tion of precaution instead 

of exclamation mark) with 

information on prevention of 

harm / damage.

  Wear gloves.

  Notice symbol with informa-

tion on how to handle the 

device properly.

General Safety 

Information

IMPORTANT 

READ THE OPERATING INST-

RUCTIONS CAREFULLY. 

STORE THE OPERATING 

INSTRUCTIONS FOR LATER 

REFERRAL.

  This device may cause seri-

ous injury if used improperly. 

To avoid personal injury and 

damage to property, read 

and comply with the follow-

ing safety instructions and 

familiarise yourself with all 

control elements. 

•  Read the operating instructions 

carefully. 

•  This device must not be used 

by children. Children must be 

supervised to ensure that they 

Summary of Contents for 327525 1904









































Reviews: