Parkside 327525 1904, Translation Of The Original Instructions

Page: 6 / 40

6
GB
Noise level specifi cation
(L
WA
)
measured ...... 86.0 dB(A); K
WA
=1.96 dB
guaranteed ........................... 88 dB(A)
Vibration (a
h
) ....... 0.69 m/s 2 ; K=1.5 m/s 2
Battery (Li-Ion) ..............PAP 20 A1
Battery cells ......................................... 5
Nominal voltage ......................... 20 V
Capacity ..................................... 2.0 Ah
Energy .....................................40 Wh
Temperature
.........................
max. 50 °C
Charging process ...................
0 - 50 °C
Operation ..........................
-20 - 50 °C
Storage .................................
0 - 45 °C
Battery (Li-Ion) ..............PAP 20 A3
Battery cells ....................................... 10
Nominal voltage ......................... 20 V
Capacity ..................................... 4.0 Ah
Energy .......................................80 Wh
Temperature
.........................
max. 50 °C
Charging process ...................
0 - 50 °C
Operation ..........................
-20 - 50 °C
Storage .................................
0 - 45 °C
Charger
.............................
PLG 20 A3
Nominal consumption ...................120 W
Voltage input ............
230-240 V~, 50 Hz
Voltage output ........................ 21,5 V
Voltage current .............................4,5 A
Safety class ....................................
II
Miniature fuse ............................
T3.15A
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can be operated with the fol-
lowing rechargeable batteries: PAP 20 A1,
PAP 20 A2, PAP 20 A3.
These rechargeable batteries may be
charged with the following chargers:
PLG 20 A1, PLG 20 A3, PDSLG 20 A1.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
Safety Information
This section covers the basic safety
regulations when working with the
electric lawnmower.
Symbols and icons
Symbols on the device:
Attention!
Read the instruction manual
carefully.