Parkside 295936, Translation Of The Original Instructions, Page: 16 / 49

PWS 230 C3 ■ 12 │
GB
│
IE
│
NI
│
CY
♦ Check whether all the fastening elements are
correctly fitted .
♦ Make sure that the arrow showing the direction
of rotation (if any) on the cutting or rough grind-
ing discs (including diamond cutting discs) and
the direction of rotation of the appliance (arrow
showing the direction of rotation on the head)
match .
Switching on and off
Check the inserted tool before use . It must be
properly installed, may not be damaged or damp,
should have no cracks and turn freely . Carry out
a 60 second test run . Do not use non-circular or
vibrating tools . Be aware of unusual noises and
sparks . Check whether all the fastening elements
are correctly installed .
NOTE
► Always switch on the angle grinder before
making contact with the material, then apply
it to the workpiece .
Switching on:
♦ Press the safety lock-out (see fig . E) .
♦ Then press the ON/OFF switch .
Switching off:
♦ Let go of the ON/OFF switch .
Turning the appliance handle
■ The handle can be turned by 90° to the
right or left (see fig . A) .
■ This allows the ON/OFF switch to be moved
to the most suitable position depending on the
working conditions .
♦ Press the release button and turn the appli-
ance handle to the right or left .
♦ Allow the appliance handle to click into
place .
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any
work on the appliance.
■ Do not use any sharp objects to clean the
appliance. Never permit liquids to enter
inside the appliance.
Otherwise the appliance
could be damaged .
■ The carbon brushes should only be replaced
by the service centre or an authorised specialist
workshop .
Apart from this, the appliance is maintenance-
free .
■ Clean the appliance regularly, preferably im-
mediately after completion of the work .
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners which can attack
the plastic .
■ A vacuum cleaner is required for thorough
cleaning of the appliance .
■ Ventilation openings must never be obstructed .
■ Remove any sanding dust stuck to the appliance
with a brush .
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline .