Parkside Performance PBSPA 12 C3, Translation Of The Original Instructions, Page: 21 / 444

21
GB MT
The specified total vibration value and the
stated specified noise emission value can
also be used for a provisional assessment
of the load.
Warning:
The vibration and noise emissions
may deviate from the specified values dur-
ing actual use of the power tool, depend-
ing on how the power tool is being used
and, in particular, what kind of material is
being worked on.
Safety measures for the protection of the
operator are to be determined that are
based on an estimate of the actual vibra
-
tion load under the real operating condi-
tions (for this, all parts of the operating
cycle are to be taken into account, for
example, times in which the electric tool
is turned off, and those during which it is
turned on but running without a load).
Charging times
The device is part of the (Parkside)
X 12 V TEAM series and can be operated
using (Parkside) X 12 V TEAM series bat-
teries.
Batteries of the (Parkside) X 12 V TEAM
series may only be charged using chargers
of the (Parkside) X 12 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAPK 12 A3, PAPK 12 B3,
PAPK 12 D1, PAPK 12 A4
We recommend charging these batteries
with the following chargers:
PLGK 12 A2, PLGK 12 B2, PLGK 12 A3,
PDSLG 12 A1, PDSLG 12 A2
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku
Charging time
(min.)
PAPK 12 A1
PAPK 12 A3
PAPK 12 A4
PAPK 12 A2
PAPK 12 B1
PAPK 12 B2
PAPK 12 B3
PAPK 12 D1
PLGK 12 A1
60 60 120 150
PLGK 12 A2
60 60 120 150
PLGK 12 A3
60 60 120 150
PLGK 12 B2
30 45 60 80
PDSLG 12 A1
60 45 60 80
PDSLG 12 A2
60 45 60 80
Safety instructions
Ensure that the safety instructions are ob-
served when operating the appliance.
Symbols and icons
Symbols on the appliance:
Carefully read these operating
instructions.
Charge level indicator
Drilling
Electrical appliances must not be
disposed of with the domestic waste.
Symbols on the accessories:
Wear safety goggles