6
1.7 Mounting Bracket/Arm
The
RVM-045DVRHD
comes with a generic mounting bracket suitable for most vehicles. If your
vehicle’s mounting plate is not compatible with the generic bracket provided, Parkmate has a
range of vehicle specific mounting brackets available at
www.parkmate.com.au
or from your
local Parkmate dealer.
FITTING VEHICLE SPECIFIC MOUNTING BRACKETS (sold separately)
1.
Unscrew the screw on the underside of the attached bracket.
2.
Remove the generic bracket from the mounting arm.
If your replacement bracket includes a mounting arm continue onto step 3.
If your replacement bracket DOES NOT include a mounting arm please go to step 6.
Please note that this step is only required if the replacement
bracket includes a mounting arm.
3.
Remove the screw from the barrel of the mounting arm by inserting
a Philips head screwdriver into the opening at the base of the arm
and unscrewing the screw securing the mounting arm to the mirror
monitor’s ball joint.
Please note that this step is only required if the replacement
bracket includes a mounting arm.
4.
Remove the mounting arm from the mirror monitor’s ball joint.
Please note that this step is only required if the replacement
bracket includes a mounting arm.
5.
Insert the replacement arm and fix to the mirror monitor’s ball joint
using the included screw.
6.
Fix your replacement bracket to the mounting arm using the included
screw.
Rear view camera connector
(plug into extension cable)
To rear camera
connects to the reverse light
Extension Cable
