10
3.6 Remote Control
The included remote control can be used to navigate the menus and settings, cycle through the
rear-view mirror DVR’s modes, view videos and photos, and manually trigger recordings and
photos.
Chapter Four: Adjust the Settings
4.1 Using the Menu
You can customise the settings of your
RVM-045DVRHD
by using the included remote
control.
To use the controller to customise settings:
1. Activate your car’s ACC power, the
RVM-045DVRHD
should automatically power up and
start recording.
2. Press the button on the remote control to stop recording.
3. Use the button to cycle through the modes (
VIDEO, PHOTO, PLAYBACK
). Each
mode has its own menu which is accessed by pressing the button in the corresponding
mode.
4. When in the
VIDEO
,
PHOTO
, and
PLAYBACK
menus the general
SETTINGS
menu can
be accessed by pressing the button again. Pressing the button in the
SETTINGS
menu will exit the menu screen.
5. Use the and buttons on the remote control to navigate the menu and the
button is used to select and confirm.
Please note:
• The
RVM-045DVRHD
will not let you enter the menu while the device is recording. Please make
sure recording is stopped by pressing the button before attempting to enter the
VIDEO
menu.
• Only the buttons outlined above are used to operate the
RVM-045DVRHD
. The menu cannot be
navigated using the arrow buttons.
• The optimum operating distance for the remote control is 1 metre, when altering the menus ensure
that the remote control is pointed towards the IR sensor and is a reasonable distance from the
device.
•
DO NOT
attempt to modify the settings of this device while you are driving. When using this device
please keep in mind your local road laws.
Select/Record
Menu Up
Enter Menu
Menu Down
Cycle through Modes
Power
