background image

Oven cleaning cycle

 

Please note: 

 The oven  cleaning cycle can only be used in the main

oven.

You need to follow the cycle to keep the inside of the main oven in

good condition.  The type of cooking you do will affect how often you
need to follow the cycle.

If you do a lot of roasting and very little other baking you should

follow the cleaning cycle once a week.  If you do very little roasting you
will only need to follow the cleaning cycle every 2-3 weeks.

To carry out a cleaning cycle:

1. Remove the oven shelves.

2. Set the oven to mark 5 for at

least 30 minutes.

3. Turn the temperature up to

mark 7 for 2 hours or until the
oven is presentably clean.
Some staining will remain.

Do not use any cleaning agents
or scrapers on the inside of the
oven. Do not wash the special
finish.

General

Clean the base of the oven, the oven shelves and the oven door while
they are still slightly warm.  This way you can easily remove any
splashes  and spills.  Wipe the base with a cloth that has been wrung
out in hot soapy water.  You may use mild abrasives.

L Y R I C   5 0   G X

26

C

are and cleaning

Summary of Contents for Lyric 50 GX





























































Reviews: