Page 9
© 1999 ParkerVision, Inc. • Use Your Camera Control Keypad
Operating Your Camera Control Keypad
Now that you’ve learned what the buttons are for and have configured them to work properly, it’s time to put them to use.
Here is the basic functionality of each button:
Controlling The Image
Manual Pan/Tilt Arrows
Press the
up
,
down
,
left
, and
right PAN/TILT
arrows to pan or tilt the camera according
to your setup (see page 4).
Zoom Perspective Buttons
Press
Zoom IN
for the camera to zoom in for a tighter view.
Press
Zoom OUT
for the camera to zoom out for a wider view.
IMAGE Setting Buttons
By pressing either IMAGE button, the camera’s image control automatically becomes a
manual
adjustment, overriding
autoIMAGE
.
Manual
• Press and release the top
IMAGE
button (
sun
) to open the iris.
• Press and release the bottom
IMAGE
button (
moon
) to close the iris.
The IMAGE setting can be adjusted manually and can be stored in a Location Preset.
You may want to use the manual IMAGE setting when you are not fully satisfied that
the video image is as dark or light as it should be. Otherwise, the IMAGE setting
automatically adjusts itself to the lighting conditions in all areas of the room.
autoIMAGE
In this mode, CameraMan automatically adjusts the IMAGE (light & dark) for each camera view.
Press
autoIMAGE
to enable automatic operation of the CameraMan’s IMAGE function.
An autoIMAGE setting can be stored in a Location Preset.
