Parker Zander AKM 1, Operating Manual

Page: 25 / 44

EN | User Manual Maintenance and repair of the adsorber
AKM 1-8 23
Maintenance and repair of the adsorber
In order to allow maintenance work on the adsorber to be carried out effi ciently and without
danger for maintenance personnel, you should comply with the following instructions.
Notes on maintenance
Warning!
Maintenance tasks may be carried out only by authorized and qualifi ed spe-
cialist personnel, and only with the plant in a switched off and depressurised
condition.
Note:
In order to ensure perfect maintenance and reliable operation we recommend
that you conclude a maintenance contract
When exchange or replacement parts are ordered, always state the adsorber
type and the build no. of the adsorber. These data are found on the type plate
of the adsorber.
◊ Carry out all maintenance work only when the plant has been shut down and depressur-
ised!
◊ Bolt connections must be undone with care! Note ram pressure values! Otherwise emerging
media may cause personal injury.
◊ Never carry out any manipulations on a hollow profi le vessel or modify the same in any
way!
◊ Following maintenance work, always check all fl ange and bolt connections for leakage and
secure seating.
◊ Never use pipes and fi ttings as steps or holding points! The components might fracture, or
the distortions which occur may cause internal damage on the adsorber. There is a risk of
injury by slipping off the components, components breaking off, and expanding compressed
air!
◊ Never leave tools, loose parts or cloths at or on the adsorber.
◊ Only use replacement parts that are suitable for the relevant function and meet the techni-
cal requirements stipulated by the manufacturer. This is always the case, if you use original
replacement parts only.