Bulletin 75-00 J / Page 15
1.
Remove check valve assembly.
Remove lower fi tting and
replace with NPT reducer
supplied in kit. Install 90
degree plastic fi tting from kit as
shown in cutaway view.
2.
Remove and discard short tube.
Turn vent fi tting 90 degrees to
rack. Install tube/ferrules and
tube clamp from kit, along with
check valve assembly as shown
in the cutaway view. (Tubing
ends may need to be trimmed
back for proper fi t)
3.
Remove and discard steel lines,
fi ttings, and bubbler.
4.
Reinstall new bubbler with
plastic lines and fi ttings
provided in kit - one line form
the bubbler cap goes to the
fi tting / orifi ce assembly and
the other goes to the water
valve Use a standard steel
tubing cutter to cut plastic line.
1.
2.
V200 Auto Purger - Bubbler Replacement Instructions
