Parker Torqmotor TC Series Service Procedure Download

Page: 19 / 52

HY13-1526-001-M1/US

Torqmotor™ Service Procedure

TC, TS, TB, TE and TJ Series

Parker Hannifin Corporation

Hydraulic Pump/Motor Division

Greeneville, TN 37745 US

TC Service Parts List Chart

Service housing assembly ITEM #17 with part number suffix-J2 includes ITEMS #11, #16, #15, #14, #13, #12 and #19.

Order (2) #032790 ITEM #17A for service housing assembly where manifold ports are used.

Standard seal kit #SK000090 includes six #032821 seal rings, #032435 commutator seal, #032377 inner seal, #028516 back up washer, #478036 dirt & water seal,
#406018 grease pack, bulletin #050015 and 028552 steel backup washer.
Special seal kit #SK000091 for units that use fire retardant fluids include six #032822 seal rings, #032435 commutator seal, #032809 inner seal, #028516 back up
washer, #478036 dirt & water seal, #406018 grease pack, bulletin #050015 and 028552 steel backup washer.
High Temp commutator seal 032861.
For reverse timed manifold, use TE015001.
* Speed sensor not available in TC Series.
High Temp commutator seal kit #SK000100 includes six #032821 seal rings, #032861 commutator seal, #032377 inner seal, #028516 back up washer, #478036 dirt &
water seal, #406018 grease pack, #bulletin 050015 and #028552 steel backup washer.
High Temp commutator/Fluorocarbon shaft seal kit #SK000230 includes six #032821 seal rings, #032861 High Temp commutator seal, #032809 Fluorocarbon shaft seal,
#028516 back-up washer, #478036 dirt and water seal, #406018 grease pack, bulletin 050015 and #028552 steel back-up washer.

EXPLODED VIEW

ITEM #

24 & 25

END

COMMUTATOR SEAL

INNER

PLUG & O-RING

SPRING

VALVE

DESCRIPTION

BOLTS (5)

COVER

SEAL

RING (5)

SEAL O-RING ASSY

W/SPRING

AAAB No Paint

Item #1

032435 032821 032377

AAAC Corrosion Resistant Paint

Item #1

032435 032821 032377

AAAH Fluorocarbon Seals

Item #1

032435 032822 032809

BBCK 1740 PSI Internal Bidirectional

Item #1C

TE016006A7 032435 032821 032377 411068A1 032750 401660 4100107

Relief, No Paint

BBCM 1200 PSI Internal Bidirectional

Item #1C

TE016006A31 032435 032821 032377 411068A1 032750 401660 41001031

Relief, No Paint

BBCN 2030 PSI Internal Bidirectional

Item #1C

TE016006A5 032435 032821 032377 411068A1 032750 401660 4100105

Relief, No Paint

BBCP 1450 PSI Internal Bidirectional

Item #1C

TE016006A10 032435 032821 032377 411068A1 032750 401660 41001010

Relief, No Paint

BBCT 1560 PSI Internal Bidirectional

Item #1C

TE016006A2 032435 032821 032377 411068A1 032750 401660 4100102

Relief, No Paint

BBCP 1450 PSI Internal Bidirectional

Item #1C

TE016006A10 032435 032821 032377 411068A1 032750 401660 41001010

Relief, No Paint

AAJV Bidirectional Shuttle Valve

Item #1A

TE016003A1 032435 032821 032377 036297 032750 401660

415603

(3:30),

Black

Paint

AABW Fluorocarbon Seal, Double Paint

Item #1

TB016000 032435 032821 032377

AAAG Fluorocarbon Seals, Black Paint

Item #1

TB016000 032435 032821 032377

AABJ Free Running Rotor Set, Black Paint Item #1

TB016000 032435 032821 032377

AABK Free Running Rotor Set, No Paint Item #1

TB016000 032435 032821 032377

OPTION GROUP

EXPLODED VIEW

ITEM #

COUPLING

WOODRUFF

DESCRIPTION

SHAFT

KEY

NUT

01- Long 6B Snapwire Groove

ML019010

09- 1” Ø, 0.38 Pinhole, 0.55” from end

ML019005

10- 1” Short Woodruff Key 1/4” Tap

ML019002

038015 (1/4x1)

11- 1” Short 6B Spline, 1/4” Snapwire Groove

ML019001

13- 1” Long Woodruff Snapwire Groove

ML019006

038015 (1/4x1)

15- 1” Ø, 0.32 Pinhole 0.4” from end

ML019011

21- “-10 Code” plus Corrosion Resistant Nitrotec

ML019008

26- 25 mm Straight with 8 mm Keyway

ML019003

039047 (8mmx7mm)

28- 13 Tooth Spline 16/32 Pitch

ML019007

72- Short Woodruff Key 1/4” Tap

ML019009

038015 (1/4x1)

COUPLING SHAFT GROUP

Summary of Contents for Torqmotor TC Series





















































Search results

Summary of Contents for Torqmotor TC Series

Reviews:

Related manuals for Torqmotor TC Series

Brands by name

Popular brands

Parker Torqmotor TC Series, Service Procedure

Search results

Summary of Contents for Torqmotor TC Series

Reviews:

Related manuals for Torqmotor TC Series

Brands by name

Popular brands