EN | Operating Instructions
Maintenance intervals and work
TG-Filter
17
▶
Check the housing for tightness.
TTGS fi lters
Depending on its size, a fi lter housing can accom-
modate up to 10 fi lter elements. The following
description applies to a single fi lter element per
housing, but equally to several ones as well.
▶
Make the same preparations as described in sec-
tion on page 15.
▶
Unscrew and remove the nuts on the lower hous-
ing.
▶
Remove the lower housing or swing it aside.
▶
Remove fl at seal.
▶
Unscrew and remove the fi lter element.
▶
Insert a new fi lter element with O-ring and
hand-tighten the fi lter element.
▶
Insert new fl at seal.
▶
Make sure the O-ring and the fl at seal are properly
seated.
▶
Assemble upper and lower housing and tighten
the screws again.
▶
Close the manual drain valve again.
▶
For ATEX-compliant fi lters:
Ensure conductivity, test and document it.
▶
Check the housing for tightness.
Summary of Contents for TGA 102-118
Page 2: ......
Page 30: ...EN Operating Instructions Spare parts and options 28 TG Filter ...
Page 31: ......