179560600 Rev1
Page
6
of
21
4
TECHNICAL INFORMATION
Ensure the process fluid is compatible with the materials of construction of the filter
housing and accessories.
Incompatible process fluids may impact the design specification of the filter housing
resulting in injury or death.
Table 4
4.1
Product Description
Filter housings are pressure retaining containers that are designed to locate filter cartridges used to remove
particulate from gas or liquid. They are fabricated from 316L Stainless steel.
4.2
Housing – General Layout
A general layout identifying major components of filter housings can be seen in Figure 1, Figure 2, Figure 3,
Figure 4 and Figure 5. A more detailed view of the product layout can be seen within the product specific general
arrangement drawings. For details of specific product general arrangements, refer to drawing number
179502500.
Gas Filter Housings
Pos.
Description
1
Filter Housing Head
2
Filter Housing Bowl
3
Vent
4
Drain
5
Inlet
6
Outlet
7
Closure Seal
8
Closure Clamp
9
Filter Cartridge Location
10
Lateral Port (PHS Only)
Figure 1