24
25
ASSEMBLY
Always connect the high pressure hose when the machine is Off(0)
1
ATTACH HIGH PRESSURE HOSE
Attach the high pressure hose to the pressure
washer water outlet. Ensure that the hose is
connected properly to prevent any leaks and full
pressure can be achieved.
OPERATION
Ensure all assembly instructions have been followed and carried out correctly.
Be aware the motor does not run continuously, only when the trigger is squeezed.
2
ATTACH HIGH PRESSURE HOSE TO GUN
Attach the high pressure hose to the gun. Ensure
that the hose is connected properly to prevent any
leaks and full pressure can be achieved.
1
STARTING THE MACHINE
1.
Make sure that the power switch is in the 'Off'(0) position.
2.
Ensure the high pressure hose is connected to both the
machine and the gun correctly.
3.
Connect the garden hose to the water inlet fitting.
4.
Open the water supply valve completely.
5.
Before turning the unit on, press the gun trigger to bleed
all the remaining air out of the pump and hose.
6.
Start the pressure cleaner by turning the on/off switch to
the 'On'(I) position and squeeze the trigger.
