background image

10

11

FOR SAFE OPERATION

• 

To ensure the units safety, only use original spare parts from the 
manufacturer or use spare parts

 

approved by the manufacturer.

• 

Do not use the appliance if a power cable or important parts of the 
appliance are damaged.

WARNING

 - Do not use the machine if a connecting cable or important 

parts of the machine are damaged, Eg safety devices, high pressure 
hoses, spray gun.

• 

The machine is not suitable for connection to portable water pipes. 

• 

Connect the machine to the mains water supply.

• 

Use the machine on a flat surface.

• 

Before use, make sure that the inlet and the nozzle are not blocked.

• 

After use, make sure there is no water in the pump and hose.

• 

When the nozzle is blocked or the high pressure hose is knotted, the 
overload protection function automatically activates and the

       machine is switched off.

• 

After solving the fault, the machine can be turned back on.

WARNING! 

-

 

When using this product, basic precautions should 

always be followed, including the following:

• 

Intended for outdoor household use only.

• 

Do not use a damaged high pressure hose.

• 

Do not use near combustible materials, combustible fumes, or dust.

• 

Some chemicals or detergents may be harmful if inhaled or ingested 
causing severe injury. Use a respirator or mask whenever there is a 
chance that vapors may be inhaled. Read all instructions included 
with the mask so you are certain the mask will provide the necessary 
protection against inhaling harmful vapors.

• 

Before starting the pressure washer in cold weather, check all of the 
parts of the equipment and be sure that ice has not formed. Do not 
store the unit anywhere that the temperature will fall below 0 C (32 F).

• 

Do not make any modifications to any of the components! 

• 

Units with broken or missing parts, or without the protective housing 
or covers should NEVER be operated.

• 

Keep the high-pressure hose connected to the pressure washer and 
the spray gun while the system is pressurized. Disconnecting the 
hose while the unit is pressurized is dangerous, and may cause injury.

• 

Do not leave the pressure washer unattended while ON.

• 

Keep water spray away from electrical wiring or fatal electric shock 
may result.

• 

Remove the plug from the socket-outlet during maintenance.

THIS PAGE HAS INTENTIONALLY BEEN LEFT BLANK

Summary of Contents for PEPW-2000























Reviews: