22
23
11
ASSEMBLY
10
ASSEMBLY
SECURE BRAKE COVER
Refit the brake assembly cover. Carefully insert the two
tabs at the rear of the cover into the two slots to the rear
of the chainsaw body.
9b
FINGER TIGHTEN BOLT
Use your fingers to tighten the nut that holds the brake
assembly in place. Turn the nut in a clockwise direction.
This will secure the brake assembly in place until it is
time to fully tighten the nut
9a
REFIT THE BRAKE ASSEMBLY
TENSION CHAIN
While holding the tip of the bar, use the screwdriver
provided to tension the chain. Turn the screw clockwise
to tighten or anti-clockwise to loosen the chain.
With the chain tensioned correctly it is now possible to
tighten the nut and allen bolt that secure the brake
assembly in place fully. Do not over-tighten however.
