37
37
9.
Disassembly
1.
Disconnect the device and associated peripherals from the power supply.
Unplug all plugs and cables.
NOTICE
Damage to the device!
If disassembly is performed carelessly the device can fall down from the top-hat rail or get
damaged.
Do not tilt the device.
Secure the device to prevent it from falling, particularly when removing it from the control
cabinet.
Push the module up and against the metal
spring on the lower end of the rail guide.
Press the module at the top against the
mounting wall until it snaps into place.
Turn the module forwards away from the
mounting rail as shown in the illustration.
Pull the module down off the mounting rail.
Fig.: 9 Disassembling the PAC340
Releaselatch
1
2
3
