19
19
Disconnecting two modules
Push down the release latch (see figure) of the module that you wish to disconnect from the
module to the left of it. Push both modules away from one another until they are about 1 cm
apart.
Push the module up and against the
metal spring on the lower end of the
rail guide. Press the module at the top
against the mounting wall until it snaps
into place.
Turn the module forwards away from
the mounting rail as shown in the illus-
tration.
Pull the module down off the mounting
rail.
Fig.: 3 Disconnecting the PAC340
1
2
3
