16
16
4.3.
Product features
The PAC340 Motion Controller is a PLC with a wide range of data interfaces. The PAC340is a
Raspberry Pi OS-based mini PC with expansion options for EtherCAT modules of the
PACIO series.
Mounting
The PAC340 is designed for control cabinet installation on a DIN mounting rail in harsh indus-
trial environments.
Processor
The basic version of the unit has a 1.5 GHz Broadcom BCM2711, Quad core Cortex-A72 (ARM
v8) 64-bit SoC
Ethernet
An Ethernet interface with 10/100/1000 Mbit/s is available. The TCP/IP and UDP/IP protocols
enable a very flexible connection to visualisation software, to higher-level control units or to the
IT infrastructure.
EtherCAT
An EtherCAT extension interface with a 10-pole connection on the side is available. The inter-
face is compatible with Parker PACIO modules.
USB
The USB 3.2 Gen 1 host interface is a widely used peripheral interface. This enables simple data
exchange or expansion with compatible USB devices.
USB sticks with FAT/FAT32/exFAT/ext3/ext4 formatting are supported.
For support of other USB devices, please contact our technical support.
Real-time clock
A Goldcap buffered, maintenance-free real-time clock can be set to the current time via a soft-
ware interface. The buffer time is 30d.
SD card
The PAC340 is equipped with 1 x µSD card slot, e.g. for data downloads.
Display interface
The display interface is compatible with the HDMI 2.0 standard. Picture transmissions up to
4Kp60 are possible here, if supported by the display. For connection, a mini-HDMI cable is re-
quired that supports at least the HDMI 1.4 standard, with a corresponding connection for the
connected monitor.
Visualisation
CODESYS web visualisation is included with the PAC340. An easy-to-use display is available
with the Berghof B-Primis ET terminals.
