18
18
2
1
5.
Assembly
5.1.
Installation
PAC 340 modules are intended for installation on mounting rails (according to DIN EN 60715,
35 x 7.5 mm).
Guide the device from below towards the
mounting rail as shown in the image so
that the metal spring snaps into place be-
tween the mounting rail and the mounting
surface.
Press the module at the top against the
mounting wall until it snaps into place.
Fig.: 2 Installing the PAC340
NOTICE
There must be at least 100 mm clearance above and below the PAC340.
This guarantees the necessary convection cooling for the PAC340. The mounting plate must
be made of metal to ensure heat conduction.
Connecting two modules
After snapping the first module onto the rail, snap on the second module about 1 cm away, to
the right of the first module. Push the second module along the rail towards the first module un-
til the release latch snaps into place.
