9
www.parker.com/euro_pneumatic
Service – Easier - Faster - Cheaper
Replacing vanes - step by step.
Step 1.
Remove the rear piece.
Step 2.
Remove the inspection plug.
Step 3.
Use a screwdriver to rotate the motor until you can see a vane in
the centre of the inspection hole.
Step 4.
Remove the old vane and replace it with a new one.
Repeat steps 3 and 4 until all the vanes have been
replaced.
Step 5.
Replace the inspection plug.
Step 6.
Replace the rear piece.
Replacing vanes with motor still fitted to the machine
The P1V-M motor has been developed to allow the vanes to
be replaced without the need to remove the motor from the
machine. This makes vane replacement easier, quicker and chea-
per, while minimising stoppages.
