MX45S Series Product Manual
25
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Chapter 6 - Maintenance and Lubrication
Materials Required
: Replacement bearing and screw lubrication (See below for lubrication type and
ordering information), clean cloth, small brush
Cross Roller Bearing and Screw Lubrication
Lubrication Type
Use:
Mobil Vactra Oil No.2 on crossed roller bearings
Kyodo Yushi Multemp PS2 Grease on drive ballscrew
Drive Leadscrews do not require lubrication
Lubricant Grease Appearance
Translucent-white, smooth and buttery.
Maintenance Frequency
Cross roller bearings and drive screws are lubricated at our facility prior to shipment. For lubrica-
tion inspection and supply intervals following shipment, apply grease/oil every 1000 hours of us-
age. The time period may change depending on frequency of use and environment. Inspect for
contamination, chips, etc, and replenish according to inspection results.
Lubricant Application
Apply lubrication on the rails or screw, using a small brush or syringe where possible.
Notes:
Do not use/mix petroleum base grease with synthetic base grease at any time. For lubrication un-
der special conditions consult factory.
Shorter lubrication interval may be required in environments with high amounts of dust and other
contamination.
