MX45S Series Product Manual
19
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Limit Sensors Magnets for Optional Linear Encoder
If the optional linear encoder option is ordered with the MX45S positioner, two limit magnets will be supplied that
are not assembled to the positioner. These are supplied loose in the packaging so that they can be assembled at
the desired locations or not assembled at all. These magnets are supplied with an adhesive backing for ease of
installation. See the drawing below for installation of magnets. For more information on the magnets and instal-
lation see Renishaw installation guide #M-9653-9154-01-A.
Optional NEMA 8 Motor
Following are the motor properties if the “M10” or “M11” motor options are selected.
MX45S Motor Specifications
Motor Part #006-2360-04
Rated Torque
N-M
0.03
Rated Current (rms) Amps/ Phase
0.80
Max. Current (peak) Amps/ Phase
1.13
Rated Resistance
Ohms/Phase
5.4
Rated Inductance
mH
1.5
Rotor Inertia
g-cm²
1.8
Number of Phases
-
2
Step Angle
Degrees
1.8
CCW
Switching Sequence
Color
Red
Blue
Green
Black
Step
A+
A-
B+
B-
1
+
-
+
-
2
+
-
-
+
3
-
+
-
+
4
-
+
+
-
Note: Viewed from Front Motor Shaft End
Motor Connector
Pin
Function
Pin 1
A+
Pin 2
A-
Pin 3
B+
Pin 4
B-
