21
On site mode
Appendix C
Instruction book, IQAN-G12
On site mode
Connect via Bluetooth
Make sure Bluetooth is On. Start the IQANgo app and follow the steps:
Connect via Bluetooth
Pairing
The first time IQANgo connects to a Bluetooth gateway, pairing might be required. For
the pairing to succeed the pairing also needs to be enabled in the Bluetooth gateway
module. The method for enabling pairing is configured in IQANdesign.
If pairing is required the pairing dialog will be shown, requesting a 6 digit
passkey. This passkey is depending on the configuration set in IQANdesign.
Also see the IQANrun user manual section on Bluetooth.
Tap ”
Connect
”
Select Bluetooth
When the correct machine ID
shows up, select it and tap
”
Connect
”
Buttons for
System
,
Log,
Measure
and
Adjust
show up