Parker GVM Series, Technical Manual

Page: 5 / 82

- 5
–
18-06-08 PVD3668_GB_GVM_June_2018
1.
INTRODUCTION
1.1. Purpose and intended audience
This manual contains information that must be observed to select, install, operate and
maintain PARKER GVM motors.
Installation, operation and maintenance of the equipment should be carried out by qualified
personnel. A qualified person is someone who is technically competent and familiar with all
safety information and established safety practices; with the installation process, operation
and maintenance of this equipment; and with all the hazards involved.
Reading and understanding the information described in this document is mandatory before
carrying out any operation on the motors. If any malfunction or technical problem occurs, that
has not been dealt with in this manual, please contact PARKER for technical assistance. In
the case of missing information or doubts regarding the installation procedures, safety
instructions or any other issue tackled in this manual, please contact PARKER directly.
PARKER’s responsibility is limited to its GVM Motors and does not encompass the whole
user’s system. Data provided in this manual are for product description only and may not be
guaranteed, unless expressly mentioned in a contract.
DANGER: PARKER declines responsibility for any industrial accident or
material damage that may arise, if the procedures and safety instructions
described in this manual are not scrupulously followed.
1.2. Safety
1.2.1. Principle
For this equipment to work safely, it must be transported, stored, handled, installed and
serviced correctly. Following the safety instructions described in each section of this
document is mandatory. GVM Motors usage must also comply with all applicable standards,
national directives and factory instructions in force.
DANGER: Non-compliance with safety instructions, legal and technical
regulations in force may lead to physical injuries or death, as well as damages
to the property and the environment.