2
DPS70
About the DPS70
The DPS70 has 26 LEDs that are used as status indicators:
▪
6 RGB tricolor with feed back
▪
6 RGB tricolor
▪
2 green
▪
2 amber
▪
6 red
▪
1 blue
▪
3 red gauge warnings.
The locations of the colors are fixed. The overlay can be configured by the
customer. Contact your Parker Vansco Account Representative for more details.
The DPS70 has 4 gauges and a large 7" (800x480) TFT LCD, IPS.
The DPS70 has a buzzer that is intended to be used typically for a fault alarm but
could also be used for other sounds.
The DPS70 can monitor up to 26 inputs:
▪
10 analog inputs.
▪
2 frequency inputs.
▪
9 digital inputs (3 have option to be populated as wake-up/power control).
▪
5 video inputs.
The DPS70 has 2 outputs:
▪
2 high-side outputs.
The DPS70 has a sensor supply output:
▪
1 sensor supply output (5 V, 100 mA).
The DPS70 can detect the following faults on the outputs:
▪
Short-circuit
▪
Overcurrent
▪
Open load
The DPS70 has 10 connectors:
▪
2 x 20-pin Molex connectors that are used to interface with the inputs,
outputs, and CAN.
▪
1 USB host type A.
▪
1 USB device type B.
▪
1 Ethernet RJ45
▪
5 BNC for video inputs
