28
DPS70
Mounting
It is up to the original equipment manufacturer (OEM) to ensure the product is
securely mounted to the vehicle.
The following guidelines are related to physically attaching the DPS70 to a
vehicle:
▪
Mount the DPS70 onto a flat dash panel, from behind/below
▪
The DPS70 should be secured with screws in all 6 screw holes using #8-32
screws from the front/top
▪
The screws should be tightened according to the fastener manufacturer's
tightening torque specifications
▪
The dash panel must include a cutout(s) for the viewing areas of the gauges
and LCD
▪
A bezel (trim ring) is recommended (usually specified and supplied by the
OEM)
▪
Clip the bezel onto the cluster from the front after the cluster is installed into
the dash panel (the dash panel must allow clearance for the bezel mounting
clip features)
Refer to Parker product drawing for cluster dimensions and further mounting
details. For more information contact your Parker Vansco Account
Representative.
9.1. Mechanical requirements
When mounting the DPS70, ensure that
▪
the DPS70 is oriented to the operator's viewing angle
▪
the wire harness connects easily to the connectors and that the bend radius is
adequate
▪
the harness is shielded from harsh impact
▪
the buzzer hole is not blocked
9. Mounting
