Technical Characteristics
High power devices
40
192-120149 N08 June 2014
Motor holding brake output
Motor holding brake output
Compax3
Voltage range
21 – 27VDC
Maximum output current (short circuit
proof)
1.6A
Insulation requirements
Enclosure rating
Protection class in accordance with EN 60664-1
Protection against human contact with
dangerous voltages
In accordance with EN 61800-5-1
Overvoltage category
Voltage category III in accordance with
EN 60664-1
Degree of contamination
Degree of contamination 2 in accordance with
EN 60664-1 and EN 61800-5-1
Environmental conditions Compax3H
General ambient conditions
In accordance with
EN 60 721-3-1 to 3-3
Climate (temperature/humidity/barometric
pressure): Class 3K3
Permissible ambient temperature:
Operation
storage
transport
0 to +45 °C
class 3K3
–25 to +70 °C
class 2K3
–25 to +70 °C
class 2K3
Tolerated humidity:
no condensation
Operation
storage
transport
<= 85% class 3K3
<= 95% class 2K3
<= 95% class 2K3
(Relative humidity)
Elevation of operating site
<=1000m above sea level for 100% load ratings
<=2000m above sea level for 1% / 100m power
reduction
please inquire for greater elevations
Mechanic resonances:
EN 60068-2-6 (sinusoidal excitation)
Sealing
Protection type IP20 in accordance with
EN 60 529
Cooling Compax3S and Compax3H
Cooling mode:
C3S025V2 ... S150V4: Convection
C3S300V4 & C3H: Forced air ventilation with fan
in the heat dissipator
Air flow rate:
459m
³
/h (C3H)
Supply:
C3S300V4, C3H050, C3H090 internal
C3H125, C3H155 external
220/240VAC: 140W, 2.5µF, Stator - 62
Ω
Optionally on request:
110/120VAC: 130W, 10µF, Stator - 16
Ω
Circuit breaker:
3A
EMC limit values Compax3S and Compax3H
EMC interference emission
Limit values in accordance with EN 61 800-3,
Limit value class C3/C4 without additional mains
filter:
Information on C2 limit value classes
(see on
EMC disturbance immunity
Industrial area limit values in accordance with
EN 61 800-3
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
