Parker Airtek SMART CYCLE PLUS 100, Operator'S Manual

Page: 3 / 45

- 3 -
Air Dryer as Built Specifications
Serial No. Model:
DESCRIPTION VALUE UNIT
---------------Dryer Design Max Air Flow SCFM Comments:
-----------------Dryer Design Max Air PSI PSI/BAR
------Dryer Design Max Inlet Temperature ºF/ºC
REFRIGERANT
--------------------------Supply Voltage VOLT CHARGE: Lbs.
-----------------------------------Cycle HZ TYPE:
----------------------------------Phase PH
FLA: N/A
------------------Number of Compressors RLA: amps
-----------------Compressor Horse Power HP LRA: amps
----------------Minimum Circuit Ampacity AMPS
----------------(copper) THHN Wire Size AWG #
---------------Fuse / Circuit Breaker Size AMP REPLACEMENT
-----------------------Nema Starter Size PART# ELEMENT:
QTY:
-----------------------Crankcase Heater WATTS
---------------Crankcase Heater Voltage VOLT
-------------------------Number of Fans
------------------Fan Motor Horse Power HP
--------------------------Max Amp Draw AMPS
----------------(copper) THHN Wire Size AWG #
-------------------------------Fuse Size AMP
enter n/a if not used) Nema Starter Size PART #
------------------------Overload Setting AMPS
-Water Condenser Max Inlet Temperature ºF
-Water Condenser Minimum Inlet Pressure PSI
-----------Control Transformer VA Rating VA
------Control Transformer Primary Voltage VOLT
----Control Transformer Primary Fuse Size AMP Electrical Dwg No.'s
---Control Transformer Secondary Voltage VOLTS
-Control Transformer Secondary Fuse Size AMP
--------------Refrigerant Low PSI Setting PSI/BAR
-------------Refrigerant High PSI Setting PSI/BAR
----------------Fan Bank #1 PSI Settings PSI/BAR
----------------Fan Bank #2 PSI Settings PSI/BAR
---------------Refrigerant Oil PSI Setting PSI/BAR
S
ection 1.0 – EQUIPMENT DATA SHEET