![background image](http://html2.mh-extra.com/html/parker/ac10-series/ac10-series_easy-start-manual_3771614003.webp)
Easy Start Guide
1. Power and Motor Connections (Single Phase)
Page 2
All content, including but not limited to graphics, text and procedures copyright
The Inverter
Drive Supermarket and must not be reproduced or altered without prior written permission.
©
This guide has been produced by The Inverter Drive Supermarket Ltd.
Parker AC10 Series Inverter (to 22kW)
The main illustration above is based on the
0.75kW rating (size 1). The supply terminals
for ratings from 1.1kW (size 2) is also shown.
The L3/T terminal (if present) can be ignored.
The order of the three motor phases
determines the initial direction the motor turns.
Notes:
Important:
Use screened or armoured cable between the
Inverter and Motor and ensure it is grounded
as shown.
The supply must match the Inverter
specification.
The motor must be separately earthed.
Before commencing, confirm that the Inverter and
all cables are completely isolated from the power
supply, have been isolated for at least 5 minutes
and that the motor is not turning.
Motor
Supply
Neutral
Live
Earth
1)Do not re-set while the motor is rotating
2)Perform parts replacement after discharge is finished
3)Do not connect output terminals to the power supply
CAUTION:
P
B
L2
P
B
U
V
W
Phase
Phase
Phase
Screen / Armour
Neutral
Live
Earth
P
P
L3/T
Size 2
Supply
L2/S
L1/R
L3/T
L2/S
L1/R