Parker 514C-04, Technical Manual

Page: 9 / 43

Product Overview
1-3
514C Product Manual
TECHNICAL SPECIFICATION
General
SPEED CONTROL
Control Action Closed Loop with Proportional Integral Control and
Adjustable Stability
Speed Feedback Armature Voltage Tachogenerator
100% Load Regulation 2 % Typical 0.1 % Typical
Maximum Torque/Speed Range 20:1 100:1
Overload 150% for 60 seconds.
TORQUE CONTROL
Control Action Closed Loop with Proportional Integral Control.
Accuracy 2 %
Overspeed Inherent.
Overload
None 100% continuous (consideration must be given
to motor when operating at low speed).
INPUTS / OUTPUTS
Analogue Setpoint Ramp 0 to ±10V 100 Kohm
Inputs Positive Trim Setpoint 0 to ±10V 100 Kohm
Negative Trim Setpoint 0 to ±10V 100 Kohm
Current Limit 0 to +7.5V 50 Kohm
Current Demand 0 to ±10V 100 Kohm
Tachogenerator Input 0 to ±350Vdc 220 Kohm
Thermistor /
Microtherm Input
<200 ohm = Normal
>1800 ohm = Overtemperature
5 Kohm
Outputs Setpoint Ramp 0 to ±10V 5 mA
Analogue Total Setpoint 0 to ±10V 5 mA
Speed 0 to ±10V 5 mA
Current Demand 0 to ±10V 5 mA
Current Meter 0 to ±5V (0 to Ical) 5 mA
Bipolar or Modulus See SW1/8
+10V Reference +10V 5 mA
-10V Reference - 10V 5 mA
Digital Run +10 to +24V 100 Kohm
Inputs Enable +10 to +24V 100 Kohm
Stall Override +10 100 Kohm
Digital Health +24V 50 mA Source
Outputs Zero Speed or Setpoint +24V 50 mA Source
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com