Parker 406LXR Series Product Manual Download Page 29

Page: 29 / 68

Parker Hannifin Corporation

EMN Automation

Parker

Irwin, Pennsylvania

406LXR Series Product Manual

Chapter 3

Setup and Usage

Cabling

The 406LXR is available with two (2) types of cabling:

Cable Transport Module

•

This is a complete cable management system including high flex cable (life rating of 10 million

cycles, dependent on motion cycle speeds, acceleration and environmental condition), cable

carriers, and connector system. This has been engineered for high life, maintenance free

operation. Extension cables are used to connect the table connector block to the amplifier and

controller. Refer to cabling diagrams for pin

out and wire color information.

•

The Cable transport module is replaceable. For detailed instructions on cable module removal

and installation please see Chapter 6

Maintenance and Lubrication

refer to the section Titled

Cable Management Module Replacement.

harnessed OEM Cable System

•

This option provides high flex round cables directly from the carriage. This option is provided for

applications where the design of the machine already has a cable management system. Five

cables come from the carriage connector: motor, encoder, Hall effect, limit/home and auxiliary

cables.

•

Recommended bend radius for these cables is 100mm. This radius will provide 10 million cycles

of the cable. Smaller bend radius will reduce cable life while larger bend radius will increase life.

The un

harnessed OEM cable system can be replaced. Refer to

Cable Management Module

Replacement

in Chapter 6.

•

NOTE: The Cable Transport Module and the OEM Cable System are interchangeable in the

field. For detail please contact Parker Hannifin or your local Parker distributor.

Summary of Contents for 406LXR Series





































































Search results

Summary of Contents for 406LXR Series

Reviews:

Related manuals for 406LXR Series

Brands by name

Popular brands

Parker 406LXR Series, Product Manual

Search results

Summary of Contents for 406LXR Series

Reviews:

Related manuals for 406LXR Series

Brands by name

Popular brands